Suunto AMBIT2 - Using Stopwatch

11.2 Using stopwatch
To use the stopwatch:
1. In the activated stopwatch display, press [Start Stop] to start measuring
time.
2. Press [Back Lap] to make a lap, or press [Start Stop] to pause the stopwatch.
To view the lap times, press [Back Lap] when the stopwatch is paused.
3. Press [Start Stop] to continue.
4. To reset the time, keep [Start Stop] pressed when the stopwatch is paused.
While the stopwatch is running, you can:
●
press [View] to switch between the time and lap time shown on the bottom
row of the display.
66