Suunto AMBIT2 - Deleting a Point of Interest (POI)

NOTE: Navigation shows the deviation from the north arrow of the watch
bezel in low speeds (<4 km/h) and the deviation from course direction in high
speeds (>4 km/h). When standing still, you can rotate the device until you see 0
indicating the correct direction. When riding a bike, Suunto Ambit2 detects your
direction even when the device is tilted.
8.3.4 Deleting a point of interest (POI)
To delete a POI:
1. Press [Start Stop] to enter the start menu.
2. Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3. Scroll to POIs (Points of interest) using [Light Lock] and select with [Next].
The device displays the number of saved POIs and free space available for
new POIs.
4. The POIs are grouped by type. Scroll to the desired POI type with [Start
Stop] or [Light Lock]. Select with [Next].
5. The device displays all the POIs saved under the selected POI type. Scroll
to the POI you wish to delete with [Start Stop] or [Light Lock] and select
with [Next].
6. Scroll to Delete with [Start Stop]. Select with [Next].
7. Press [Start Stop] to confirm.
39
en