Suunto AMBIT2 - Navigating a Route

8.4.2 Navigating a route
You can navigate a route you have dowloaded to your Suunto Ambit2 from
Movescount, see Section 8.4.1 Adding a route on page 41.
NOTE: You can also navigate when you are recording an exercise, see Section
12.6.7 Navigating during exercise on page 83.
To navigate a route:
1. Press [Start Stop] to enter the start menu.
2. Scroll to NAVIGATION with [Start Stop] and enter with [Next].
3. Scroll to Routes with [Start Stop] and enter with [Next].
The device displays the number of saved routes and after that a list of all
your routes.
4. Scroll to the route you want to navigate with [Start Stop] or [Light Lock].
Select with [Next].
5. The device displays all the waypoints on the selected route. Scroll to the
waypoint you want to use as the starting point with [Start Stop] or [Light
Lock]. Accept with [Next].
42