●
scroll the TIME, ALTI & BARO and COMPASS modes with [Next].
●
enter the options menu by keeping [Next] pressed.
11.3 Countdown timer
You can set the countdown timer to count down from a preset time to zero.
After you have activated the countdown timer, it is shown as the last display
after TIME, ALTI & BARO and COMPASS modes.
The timer makes a short sound every second during the last 10 seconds and
sounds an alarm when zero is reached.
To set the countdown time:
1. Press [Start Stop] to enter the start menu.
2. Scroll to TIMERS with [Light Lock] and select with [Next].
3. Scroll to Countdown with [Light Lock] and select with [Next].
4. Press [View] to adjust the countdown time.
5. Set the hours and minutes with [Start Stop] and [Light Lock]. Accept with
[Next].
6. Press [Start Stop] start the countdown.
67
en
To Next Page
Loading...
