NOTE: If you are wearing your Suunto Ambit2 on your wrist, you will need to
take it off in order to get an accurate temperature reading because your body
temperature will affect the initial reading.
9.4 Using Barometer profile
The Barometer profile shows the current sea level air pressure. This is based
on the reference values added in the settings and the constantly measured
absolute air pressure. For information on setting the reference values, see
Section 9.2.2 Setting reference values on page 52.
Changes in the sea level air pressure are presented graphically in the middle
row of the display. The display shows the recording of the last 27 hours with
a recording interval of 1 hour.
When the Barometer profile is activated, the barometer icon is shown on the
display. For information on setting the ALTI & BARO profile, see Section 9.2.1
Setting profiles on page 52.
When the Barometer profile is activated, Suunto Ambit2 shows you the
following barometric information:
●
top row: the current sea level air pressure
●
middle row: a graph displaying sea level pressure data from the past 27
hours (1h recording interval)
●
bottom row: toggle between temperature, time and altitude reference
value with [View]
55
en
To Next Page
Loading...
