NOTE: By default, altitude measurement is based on FusedAlti. For more
information, see Section 9.6 FusedAlti
TM
on page 58.
To record altitude:
1. Make sure that the Altimeter profile is activated.
2. Press [Start Stop] to enter the start menu.
3. Press [Next] to select EXERCISE.
4. Scroll the sport modes with [Start Stop] or [Light Lock] and select a suitable
mode with [Next].
5. Wait for the device to notify that the heart rate and/or GPS signal have been
found, or press [Start Stop] to select Later. The device continues to search
the heart rate/GPS signal. Press [Start Stop] to start recording the log.
78
To Next Page
Loading...
