4-16 FUEL SYSTEM
• Remove the top cap 1.
%
Do not use compressed air on the carburetor body, be-
fore removing the diaphragm; this may damage the dia-
phragm.
• Remove the spring 2 and the piston valve along with its dia-
phragm 3.
• With the jet needle stopper 4 pinched, remove it.
• Remove the washer 5, E-ring 6, washer 7 and jet needle 8.
NOTE:
The washer
5
is thicker than the washer
7
.
• Remove the float chamber 9.
& 09900-09004: Impact driver set
To Next Page
Loading...
