ENGINE 3-11
• Pour 3.3 L of SF/SG or SH/SJ with JASO MA (API) engine oil,
with a viscosity rating of 10W-40 (SAE), into the engine after
overhauling it.
• Start up the engine and allow it run for several minutes at idle
speed and then stop the engine. Wait three minutes and then
check that the oil level remains between the marks on the oil
level inspection window
2.
• Adjust the following items to specification.
* Throttle cable play............................................... !2-11
* Engine idle speed .............................................. !2-11
* Carburetor synchronization................................. !4-25
* Drive chain slack................................................. !2-14
* Clutch cable play................................................. !2-12
Oil change 3 300 ml
Oil and filter change 3 500 ml
Engine overhaul 4 600 ml
To Next Page
Loading...
