3-52 ENGINE
$
• After installing the 3rd driven gear onto the driveshaft, install
lock washer #2
3 onto the driveshaft, and position it so it fits
into the groove.
• Then, fit lock washer #1
4 into lock washer #2
3.
$
1 Left end bearing
2 Oil seal
3 2nd drive gear
4 Countershaft
When installing the 3rd and 4th driven gear bushings
onto the driveshaft, align the driveshaft oil hole
1
with the bushing oil hole
2.
Install the oil seal as shown in the illustration.
To Next Page
Loading...
