Suzuki GSX-R600 - Page 549

Manual Transmission: 5B-7
• Apply thread lock to the bolts and tighten them to the
specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Driveshaft left bearing case bolt (b): 12 N·m (1.2
kgf-m, 8.7 lb-ft)
• Apply grease to the dust seal lip and O-ring (5).
CAUTION
!
Replace the O-ring (5) with a new one.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Apply thread lock to the bolts and tighten them to the
specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Driveshaft retainer bolt (c): 12 N·m (1.2 kgf-m, 8.7
lb-ft)
• Apply grease to the O-ring (6).
CAUTION
!
Replace the O-ring (6) with a new one.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Install the spacer (7).
Gearshift Cam and Gearshift Fork
• Install the gearshift forks (1).
• Install the gearshift cam (2) with the bearing fitted.
(b)
(b)
I837H1520021-03
5
(c)
(c)
I837H1520022-03
6
7
I837H1520023-03
1
I837H1520024-01
2
I837H1520025-01