SV 104IS USER’S MANUAL______________________________________________________
13
2 KIT COMPONENTS
2.1 SV 104IS dosimeter short form specification
Acoustic Dosimeter conforming to international standards IEC 61252; ANSI S1.25;
Class 2 Microphone, MEMS type: SV27IS, 1/2" housing
OLED colour display with super brightness and contrast
Meaningful 64MB memory
Infrared high speed optical interface
Parallel Slow, Fast, Impulse detectors for the measurements with A, C, Z filters
Frequency Range 20 Hz ÷ 10 kHz
Measurement range 60 dBA RMS ÷ 140.1 dBA Peak
Dynamic Range 90 dB
Exchange rates 2, 3, 4, 5, 6
Measurement results: Run Time (TIME), Lpeak, Lmax, Lmin, L, DOSE (%), D_8h, PrDOSE, Leq,
LAV, LE, SEL8, E, E_8h, LEPd, PSEL, Ltm3, Ltm5, Lstat, PTC, PTP, ULT, TWA, PrTWA, Lc-a,
OVL
3 independent user configurable acoustic measurement profiles
Easy in use predefined setups
Time-history data logging of Leq/Lav/Lmax/Lmin/Lpeak with variable 0.1 s to 1 hr logger step
and separate summary results intervals with statistical levels
1/1 Octave real time analysis - 9 filters with centre frequencies 31 Hz ÷ 8 kHz, Type 2 – IEC 1260;
presented as a bar graph with Leq and Lmax band levels plus overall A, C and Z broadband
weightings (as option called SF 104-OCT)
Audio events recording (time limited by internal memory), triggered, 12/24 kHz sampling rate, wav
format (as option called SF 104-WAV)
Voice Comments (time limited by internal memory) records audio on demand, created before
or after measurement, added to measurement file
Vibration shock detector with user selectable variable threshold: 1g-15g
Automatic acoustic field calibration with one touch activation before and after measurement
Battery operated only device, operational time > 50 hours (display off, octave analysis off)
Extremely compact, lightweight and robust case with IP65 ingress protection suitable for
outdoor use
Figure 2-1 SV 104IS instrument with the microphone and windshield