Svantek SV 104IS - Figure 5-9 Measurement Configuration Setttings Tab; Measurement Parameters Settings Tab

SV 104IS USER’S MANUAL______________________________________________________
49
5.5.3 Measurement parameters settings tab
Within the measurement tab you can choose in which mode of operation the SV 104IS should work:
Dosimeter, or Dosimeter with 1/1 octave analysis.
Notice: Enabling octave analysis shortens battery life, so take it into consideration
and double check the battery status before measurement run.
Other basic parameters configuration is per figure provided below:
Figure 5-9 Measurement configuration setttings tab
select
measurement
mode of
operation