Svantek SV 104IS User Manual

SV 104IS USER’S MANUAL ______________________________________________________
6
4.3 Turning on/off 29
4.4 Battery check 30
4.5 Reviewing unit label 31
4.6 Measurement setups - basic configuration 32
4.7 CALIBRATION 33
4.8 Voice comments recording 36
4.9 Before and after measurement run 37
4.10 Starting and stopping measurement run 37
4.11 Auto-run mode information 37
4.12 Security lock 38
4.13 Mounting and positioning the SV 104IS 39
4.14 Reviewing measurements 40
4.15 Resetting the dosimeter 40
5 SUPERVISOR BASIC OPERATIONS 41
5.1 Installing and connecting to PC 41
5.2 Main software window 42
5.3 Instruments inventory panel 43
5.4 Instrument options unlock 44
5.5 Advanced configuration setup 45
5.5.1 Working with configuration setup files 45
5.5.2 Profile settings tab 48
5.5.3 Measurement parameters settings tab 49
5.5.4 Time-history data logging settings tab 50
5.5.5 Display VIEW configuration tab 51
5.5.6 Octave analysis Spectrum configuration tab 52
5.5.7 General settings tab 52
5.5.7.1 Calibration settings panel 53
5.5.7.2 Statistical levels settings panel 53
5.5.7.3 Keyboard security settings panel 54
5.5.7.4 Auxiliary settings panel 55
5.5.8 Auto-Run settings (timer, pauses) tab 56
5.5.9 Recording options tab (optional) 58
5.5.9.1 Event and Wave recording configuration panel 58
5.6 Working with data files 59
5.6.1 Instrument files 59
5.6.2 Local files “Data Browser” 60
5.7 Working with sessions and reporting 61
5.7.1 Report panels 63
6 SV 104IS MAINTENANCE 69
6.1 General recommendations for use 69
6.2 Cleaning 69
6.3 In situ calibration 70

Svantek SV 104IS Specifications

General

Brand	Svantek
Model	SV 104IS
Category	Measuring Instruments
Language	English