Svantek SV 104IS User Manual

SV 104IS USER’S MANUAL______________________________________________________
57
Setting hour and day of the measurement’s start
The “Start Time” determines the time for the measurement to start. The required hour and minute can be
selected.
The “Start Day” determines the date of the measurement start. The timer can be programmed up to one
month ahead and during the date setting the current state of the Real Time Clock is taken into account. The
required date can be selected. Make sure to check that the real time clock settings for the measurement
location are correct before beginning a delayed timer measurement.
Selecting the period between two consecutive measurements
The “Repeat” and “Repetitions Number” positions are displayed when “Regular” mode is selected.
The period between two consecutive measurements is set in the “Repeat” line.
“Repetitions Number” parameter can be programmed from 1 up to 100.
There is also possibility to program two independent PAUSES in the form of Relative, or Absolute time
programming. See Figure 5-18 for detailed settings in magnified area.

Svantek SV 104IS Specifications

General

Brand	Svantek
Model	SV 104IS
Category	Measuring Instruments
Language	English