OFF
_ENG
FRE
(nosubtitles)
(Englishsubtitles)
(Frenchsubtitles)
3 Press [BACK] to exit.
BACK
Note:
• To cancel the subtitle, select "OFF" at step 2.
• If your language is notshown afterpressing
[Cursor • iV] several times, the disc may not have that
language. However, some discs allow you to change subtitle
languages setting in the disc menu. (Operation varies
depending on the disc, so refer to the manual along with
the disc.)
• When "NOTAVAILABLE'appears on the TVscreen, it means
no subtitle is recorded on the scene.
• If you choose a language that has 3-letter-language code,
the code will be displayed every time you change the subtitle
language setting. If you choose any other languages, "---"
will be displayed instead. (Refer to page 48.)
• Ejecting the disc will cancelyour subtitle setting.
SomeDVDmaycontain sceneswhich havebeenshot
simultaneouslyfrom variousangles.Youcanchangethe
cameraangleif"_ "appearsonthe screen.If"ANGLEICON"is
setto"OFF"in"OTHERS"menu,"_ "will notappear.(Referto
page47.)
I During playback, press [MODE] repeatedly until
" "appears.
MODE
2 Use [Cursor AI V] repeatedly until your desired
camera angle appears.
or
Press [BACK] to exit.
BA©_
Thisunit allowsyou toselectanaudiolanguage(if multiple languagesare
available)duringDVDplayback.
During playback, press [AUDIO] repeatedly until the
desired language appears.
A }}(:
Adjust the black level to make the dark areas of the TV picture brighter.
1 During playback, press [MODE] repeatedly until"_"
appears.
|MODE ,_
/
ENG
[_ SPA
FRE
Each time you press [AUDIO], the audio language
changes as example below.
(English audio)
(Spanish audio)
(French audio)
Note:
• Some discs will only allowyou to change the audio setting
from the disc menu. Refer to the manual accompanying the
discs for details.
• If your language is not shown after pressing [AUDIO] several
times, the disc may not have that language.
However, some discs allow you to change multiple audio
languages setting in the disc menu. (Operation varies
depending on the disc, so refer to the manual along with
the disc.)
• When "NOTAVAILABLE'appears on the TVscreen, it means
audio language is not available.
Press [Cursor A/V] to adjust the black level.
or
/
ON : Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
Press [BACK] to exit.
BACK
Note:
• The setting will be kept even if the unit is turned off..
EN
To Next Page
Loading...
