17.ELECTRICAL SYSTEM
17-11
Removal of Starter motor
Remove the rear cover (screw x 4).
Remove the right body cover (screw x 3).
Remove the battery cover (nut x 2).
Disconnect the cable negative terminal (-), then
the cable positive terminal (+).
Remove the luggage box.
Loosen the lock bolt and remove the starter
motor.
Installation of Starter motor
In reverse order of the removal of the starter
motor.
Meters
Removal
Loosen lock bolts and remove from the front
handlebar guard (bolt x 2).
Loosen screws from the lower part of the front
handlebar guard (screw x 4).
Loosen screws from the front luggage carrier
(screw x 4).
Disconnect the connectors for the headlamp and
direction indication lamps.
Remove the front guard.
Disconnect the connector of the dashboard.
Loosen the cable for the speedometer.
Disconnect the connection for the dashboard.
Loosen lock bolts under the tachometer (bolt x
2).
Loosen screws from the tachometer cover
(screw x 4).
Loosen lock screws from the odometer (screw x
4).
Remove the meter.
Installation of the meter
In reverse order of the removal.
screw
×
4
bolt
To Next Page
Loading...
