Symmetricom TimeProvider 500 series User Manual

Issue 3: Mar 96 TMSL 097-45018-02
Page 21
EDIT EQUIPMENT (Contd)
Example:
ED-EQPT::COM-1:115::9600,,X.25,,,;
This example, tagged as command 115, identifies port COM1 as set for 9600 baud, using a PAD as the com-
munications device, and using the factory settings for the remaining parameters.
COMPLETED RESPONSE
<sid> <date> <time>
M <ctag> COMPLD
;
Example:
TELECOMSOLUTIONS 95-12-08 15:04:13
M 170 COMPLD
;
ERROR RESPONSE
<sid> <date> <time>
M <ctag> DENY
<errcde>
;
errcde: ENEQ = not equipped
IIAC = invalid aid
ICNV = command not valid
IICT = invalid ctag
IDNV = data not valid
IISP = invalid syntax or punctuation
IITA = invalid tid
INUP = unimplemented non-null parameter
SARB = system resources are busy
SCSN = invalid sequence
SDNA = duplex unit not available
SROF = requested operation failed
SNVS = not in valid state
Example:
TELECOMSOLUTIONS 95-12-08 15:12:47
M 170 DENY
IISP
;

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English