Symmetricom TimeProvider 500 series User Manual

Issue 3: Mar 96 TMSL 097-45018-02
Page 23
EDIT PARAMETER T1 (Contd)
ED-PRMTR-T1::MRC-2-2:154:1,NETWORK,ANALOG;
This example, tagged as command 154, commands MRC B of span 2 to be the first priority refer-
ence, specifies it is using a network reference and analog signal type; framing mode, and crcmode
parameters are not available and will cause an error to be initiated if input.
COMPLETED RESPONSE
<sid> <date> <time>
M <ctag> COMPLD
;
Example:
TELECOMSOLUTIONS 96-02-08 15:04:14
M 154 COMPLD
;
ERROR RESPONSE
<sid> <date> <time>
M <ctag> DENY
<errcde>
;
errcde: ENEQ = not equipped
IIAC = invalid aid
ICNV = command not valid
IICT = invalid ctag
IDNV = data not valid
IISP = invalid syntax or punctuation
IITA = invalid tid
INUP = unimplemented non-null parameter
SARB = system resources are busy
SCSN = invalid sequence
SDNA = duplex unit not available
SROF = requested operation failed
SNVS = not in valid state
Example:
TELECOMSOLUTIONS 96-02-08 15:04:14
M 154 DENY
IISP
;
REFERENCE
AT&T 365-340-202, August, 1992

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English