Symmetricom TimeProvider 500 series User Manual

TMSL 097-45018-02 Issue 3: Mar 96
Page 38
SET ATTRIBUTE T1 (Contd)
Examples:
SET-ATTR-T1::MRC-1-4:137::MJ,AIS;
This example, if E1 is the input, tagged as command 137, sets the alarm indication signal to a ma-
jor alarm on MRC A, span 4.
This example, if analog is the input, will be denied, and an IDNV error code produced.
COMPLETED RESPONSE
<sid> <date> <time>
M <ctag> COMPLD
;
Example:
TELECOMSOLUTIONS 96-02-08 15:04:14
M 137 COMPLD
;
ERROR RESPONSE
<sid> <date> <time>
M <ctag> DENY
<errcde>
;
errcde: ENEQ = not equipped
IIAC = invalid aid
ICNV = command not valid
IICT = invalid ctag
IDNV = data not valid
IISP = invalid syntax or punctuation
IITA = invalid tid
INUP = unimplemented non-null parameter
SARB = system resources are busy
SCSN = invalid sequence
SDNA = duplex unit not available
SROF = requested operation failed
SNVS = not in valid state

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English