System Overview (cont'd)
12
Alarms
When an alarm occurs, Symphony (and any other Keypads) and external sounders
will sound, and the zone(s) causing the alarm are displayed. If your system is
connected to a central monitoring station, an alarm message will also be sent. To
stop the alarm sounding, simply disarm the system.
Memory of Alarm
When an alarm condition occurs, the number(s) of the zone(s) that caused the
problem are displayed, along with the type of alarm (e. g. FIRE, ALARM). These
remains displayed until cleared by disarming the system.
Fire Protection
The fire protection portion of your security system (if used) is always on and will
sound an alarm if a fire condition is detected.
User Codes
Each user must be assigned a name with a corresponding 4-digit user code in order
to gain access to various features and functions. Through Symphony, you may
program users to access any and all of the following systems:
•
Fire/Burglary
•
Message Center
•
Internet
Users for the systems are programmed in a central user setup location that provides
the specific questions for the user pertaining to each system. You may want these
users to be the same, but there are situations in which you may want a user to have
access to one system (e.g., Message Center) without having access to another (e.g.,
the Fire/Burglary system).
Internet Features
As a household Internet appliance, Symphony provides access to a wealth of
information, including:
•
News
•
Sports
•
Weather
•
E-mail, and
•
Updates of user-selectable content such as your horoscope.
Additionally, you may control all of Symphony’s functions from any personal
computer or laptop that has Internet capabilities, including security system
functions (arming, disarming, etc.) and to check to see if you have a voice message.
To Next Page
Loading...