Symphony FA800KP - How to Disarm the System

Security System Operation (Cont'd)
21
How to Disarm the System
IMPORTANT:
If you return and the main burglary sounder is on, DO NOT enter
the premises, but call the police from a nearby safe location. If you return after an
alarm has occurred and the main sounder has shut itself off, Symphony will beep
rapidly upon entering, indicating that an alarm has occurred during your absence.
LEAVE IMMEDIATELY and CONTACT THE POLICE
from a nearby safe
location.
Disarm the system as follows:
ACTION SCREEN
1. Press the
DISARM
button on any "
Armed"
screen. The "User Authorization" screen is
displayed with the instructions
To Disarm,
Enter Code
.
2. Enter your 4-digit user code. The
Partition
No. & Description
screen is displayed.
3. Press the
DISARM ALL
button if you wish
to disarm the system. Symphony beeps once
and the "Arming" screen is displayed showing
the system as Ready to Arm or not ready if any
zone is faulted (open).
NOTE:
If you wish to disarm only selected
partitions, you must first highlight the
partition(s) to be disarmed, then press the
DISARM SELECTED
button. Symphony
beeps once and the "Arming" screen is
displayed showing the system as Ready to
Arm or not ready if any zone is faulted (open).