Symphony FA800KP - How to Bypass Zones

Security System Operation (cont'd)
18
How to Bypass Zones
The Bypass function is used when you want to arm your system with one or more
zones intentionally unprotected. Bypassed zones are unprotected and will not cause
an alarm when violated while your system is armed.
1. The system will not allow you to bypass fire or emergency zones.
2. To bypass zones, the system must be disarmed first.
To bypass zones do the following:
ACTION SCREEN
1. From the "Home" screen, press the
SECURITY
button. The "Arming" screen is
displayed.
2. From the "Arming" screen, press the
MORE
CHOICES
button. The "More Choices" screen
is displayed.
3. Press the
SHOW ZONES
button on the
"More Choices" screen. The "Zones" screen is
displayed.
NOTE:
While Symphony is requesting and
receiving the zone data from the control panel,
the "Zones" screen displays "
Getting Zone
Status…
".