Glossary (Cont'd)
84
Erase
: A Message Center function that deletes the selected item from the system.
You can delete messages, memos, phone numbers, and users.
Exit:
A function that ends your Message Center session by pressing the [9] key.
Greeting
: See “Outgoing Messages.”
Hands Free
: A call-screening feature that describes the use of the Keypad or
speaker for listening in to calls.
Keypad:
This is the area on your Keypad containing numbered pushbuttons similar
to those on telephones or calculators. These keys control the arming or disarming of
the system, and perform other functions that were previously described in this
manual.
Keypad CID On/Off:
A feature that causes Caller ID information to be announced
at Message Center Keypads.
Last Number Redial:
Mailbox
: A place where messages and memos are stored in Message Center. The
system provides 4 mailboxes (numbered 1-4). Each family member can be assigned
access to any number of mailboxes.
Master Code:
A 4-digit code that gives users access to all of the system’s functions,
except unattended downloading (installer only). See also “User Code.
Memory Dial:
A feature that lets you dial a phone number that has been
previously programmed into the system.
Memory Location:
A storage place for phone numbers up to 16 digits, where each
is identified by a 2-digit location number (01-15).
Memo:
A message recorded for another user.
Menu:
A collection of voice prompts announced after certain keys are pressed.
Message:
A recording left by a caller in one of the assigned mailboxes. During
message playback, oldest messages are announced first. See also “New Messages”
and “Saved Messages.”
Message Beeps:
A Message Center feature that causes the system to beep over the
dial tone when you pick up a phone if there are messages waiting.
New Messages:
A message(s) that have not yet been listened to; causes the yellow
“message” LED at the Message Center Keypad to flash.
Outgoing Message (OGM):
A pre-recorded greeting that is announced to callers
when Message Center answers a call.