SA160
AIRCRAFTA I R C R A F T
Symphony
AIRCRAFT
'FUEL FLW'
'REM'
'HRS'
'BRN'
'ADD'
. Fuel Flow is the default mode after powering up. This
mode displays the fuel Oow in the appropriate Units Per Hour
both digitally and graphically. The digital section provides 0.1 unit
resolution. The graphic section provides you with a quick
referenceofthecurrent fuel flow.
. This mode displays the current fuel total remaining in
gallons. It is digitally displayed in 0.1 gallon increments. This mode
is ONLY usable, if you have kept the computer's memory updated
with fuel information corresponding to the actual aircraft usable
fuel and have always had the computer operational when fuel is
being burned. The graphic display is shut off as it has no
relationshiptothisparameter.
: This mode displays the calculated hours of fuel remaining
(sometimes referred to as endurance), as a function of the current
flow rate and current fuel total in the computer's memory. It is
digitally displayed in 0.1 hour increments. This mode is ONLY
usable, if you have keptthe computer's memory updated with fuel
information corresponding to the actual aircraft usable fuel and
have always had the computer operational when fuel is being
burned. The graphic display is shut off as it has no relationship to
thisparameter.
: This mode displays the gallons of fuel burned in flight since
system power up. It is digitally displayed in 0.1 gallon increments.
The graphic display is shut off as it has no relationship to this
parameter.
. This mode allows you to add fuel to the fuel computers
'electronic tank' after fuel has physically been added to the aircraft
tanks.Seesectionon'ADDINGFUELTOTHECOMPUTER'.
Feb 25, 2005
11 of 27
To Next Page
Loading...