AIRCRAFT
SA160
AIRCRAFTA I R C R A F T
Symphony
STEP 1 ADD
STEP 2.
STEP 3.
'REM'
REM
'FUEL FLW'
.Press'BUTTON 4' until the ' ' indicator activates
Press 'BUTTON 3 to add tens and 'BUTTON 5' to add ones
tomatchthefuelthatwaspumpedintothetank(s).
NOTE
To 'top off the tank(s) just press 'BUTTON 3' to run up a number more that
your max capacity. The system will only add what is needed to 'fill' the
computers electronic tank to its max capacity as set up in 'INITIAL SET
UPOFTHEFUELCOMPUTER'.
If you made a mistakejust leave everything alone for more
than 20 seconds and the computer will automatically cancel the
'ADD' mode. If you are happy with the entered value, then press
'BUTTON 4' and the new fuel will be automatically added to the
prior fuel 'REM' total. Double check this new total by pressing
'BUTTON4'untilthe'REM'fuelisshown.
NOTE
In the event you want to 'zero' the current fuel remaining value, press
'BUTTON 4' until is displayed and continue holding it in.
Simultaneously press 'BUTTON 3' and ' ' value will be cleared to
zero.
Press 'BUTTON 4' to select the desired fuel computer operating mode.
The mode is displayed below the permanent words on the
display:
4.8 FUEL COMPUTER NORMAL OPERATION MODES
Feb 25, 2005
10 of 27
To Next Page
Loading...