Syntec 22/220 Series - Page 75

机床产品/Machine Tool Products
              –
              22/220 Series Controller Application Manual
Software Installation、Data Backup/Restore–75
•
•
•
•
•
•
If chosen a MB backup file, the user can select the items to be restored.
<NOTE> History Alarm, Operation Log, and Diagnosis Logs can not be restored.
If chosen a SB backup file, it's unable to select the restoring items.
Please refer to the "Drive Restoration Notifications" when restoring drive parameters.
After pressing Next, there is another confirmation window
After the controller is ready, it will prompt the user to reboot