SystemAir Geniox GO - Page 75

|
67
7. Once the roof is positioned correctly, secure roof overhang profiles (pos 5) with self drilling screws (pos 7).
8. Then mount one of the trapezoidal roof sheets (pos 6) on the roof overhang profile (pos 5) with self drilling screws
with sealing washer (pos 8). Mount the rest of trapezoidal roof sheets in the same way as the first. Last roof sheet
must be mounted on the second roof overhang profile (pos 5) using self drilling screws with sealing washer (pos
8).
211728 | v7.2