SZKTDZ KT-LCD8S - Automatic Prompt Interface; Error Code Display; Motor Operating Temperature Alarm

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 17 -
Under the status of data flashing, if there were no operations on the data within 5
seconds, the meter will automatically return to display1 after 5 seconds, and the
original record content will be saved.
○ Automatically Prompt Interface
Error Code Display：
When the electronic control system of the electric vehicle fails, and the meter will
automatically display (flicker) fault code. You can’t exit the fault code display only the
fault is removed.
Error Code & Definition Table：
Error Code
Definition
Motor position sensor fault!
Failure of electronic control system
THROTTLE fault!
Malfunction of the operation
Motor operating temperature alarm：
Under any interface, when the motor operating temperature exceeds the warning value,
the motor operating temperature display flashes to alarm, meanwhile, the controller will
offer the appropriate protection to motor.