ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 19 -
to save the current set values, then press button (DOWN) to enter the next setting.
○ Wheel Diameter
After finishing the maximum riding speed setting, press button (DOWN) to
enter the wheel diameter setting interface, press button shortly (SW) , and then the
wheel diameter display column flashes. Press button (UP) or button (DOWN)
to choose the corresponding wheel diameter specification to a selected vehicle. The
selection range of wheel diameter specifications are 15 species such as
5,6,8,10,12,14,16,18,20,22,24,26,700c, 28 and 29 inches.
Under the wheel diameter setting interface, if there’s no button operation on the
meter for more than 1 minute, and then the meter will automatically return to display
1, and the original set values will be saved.
After finishing the wheel diameter setting, press button (SW) shortly to save
the current set specification, then press button (DOWN) enter into the next setting.
○ Metric and Imperial Units
To Next Page
Loading...
