SZKTDZ KT-LCD8S - C4 Throttle Function Setting

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 29 -
value and then press button (DOWN) to enter C4 parameter setting interface.
○ C4 Throttle Function Setting
Enter C4 parameter setting interface after C3 parameter setting is finished, press
button (SW), C4 parameter column flashes.
C4 parameter setting interface
C4 is throttle function setting, the setting range is 0-4, press button (UP) or
button (DOWN) for selection.
C4 parameter definition table：
C4 value
P4=0
P4=1
0
zero startup throttle
Non-zero startup throttle
1
Zero startup, throttle speed limit is
6KM/H
Before power assist, the throttle speed limit is
6KM/H, after power assist, throttle is full speed.
2
Zero startup, throttle speed limit is
specified
Non-zero startup, throttle is specified speed limit.
3
Zero startup, Zero gear effectively
Before power assist, the throttle speed limit is
6KM/h, after power assist, throttle is full speed.
Stop power assist, return the throttle speed limit is
6KM/H.