ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 40 -
C12 is controller minimum operating voltage adjustment setting (tiny adjustment of
voltage shortage), the default value is 4, and the setting range is 0-7, press button
(UP) or button (DOWN) for selection.
C12 parameter definition table：
C12 default value is 4, namely, controller minimum operating voltage (voltage
shortage value); when setting is 5, the default value plus 0.5V, when setting is 4, the
default value minus 0.5Vand so on.
After finishing C12 parameter setting, press button (SW) to save the current
value and then press button (DOWN) to enter C13 parameter setting interface.
○ C13 ABS brakes of the controller and parameters of anti-charge control Setting
Enter C13 parameter setting interface, press button (SW), C13 parameter bar
To Next Page
Loading...