SZKTDZ KT-LCD8S - L Parameter Settings

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 41 -
flashes.
C13 parameter setting interface
C13 is ABS brakes of the controller and parameters of anti-charge control setting, the
default value is 0 with the setting range between 0-5, press (UP) button or
(DOWN) button to make selection.
C13 parameter definition table:
C13 Value
ABS braking strength
Energy recovery efficiency
0
None
None
1
Class 1 braking strength
Best energy recovery
efficiency
2
Class2 braking strength
General energy recovery
efficiency
3
Class 3 braking strength
Weaker energy recovery
efficiency
4
Class4 braking strength
Poor energy recovery
efficiency
5
Class5 braking strength
Bad energy recovery
efficiency
The recommended value of C13 is 1; other values need to be chosen with caution for
use.
Be sure to note: the higher is the braking intensity level, and the braking strength
will be greater, the greater damage to the motor shaft accordingly.