SZKTDZ KT-LCD8S - C10 Automatic Restore Default Setting

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 36 -
Password Setting Interface
The password setting is done sequentially from left to right, press button to
confirm after each setting and enter next setting. Password setting range is 000-999, press
button (UP) or button (DOWN) for selection.
Please note：If you forget your password, the parameters can only be copied (see
parameter copy) by data source meter prier to be decoded.
After finishing C9 parameter setting, press button (SW) to save the current
value and then press button (DOWN) to enter C10 parameter setting interface.
○ C10 Automatically Restore Factory Setting
Enter C10 parameter setting interface after C9 parameter setting is finished, press
button (SW), C10 parameter column flashes.