SZKTDZ KT-LCD8S - C8 Motor Operating Temperature Display Setting

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 33 -
button (SW), C7 parameter column flashes.
C7 parameter setting interface
C7 is cruise function setting, the setting range is 0 or 1, press button (UP) or
button (DOWN) for selection.
C7 parameter definition table：
C7 value
Cruise function
0
Off
1
On
After finishing C7 parameter setting, press button (SW) to save the current
value and then press button (DOWN) to enter C8 parameter setting interface.
○ C8 Motor Operating Temperature Display Setting
Enter C8 parameter setting interface after C7 parameter setting is finished, press
button (SW), C8 parameter column flashes.