ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 24 -
P4 parameter setting interface
P4 is throttle startup setting, when P4 setting is 1, indicating the throttle is under
"non-zero startup" mode, namely, the throttle can be effective only after startup the foot
power assist. When P4 setting is 0, indicating the throttle is under "zero startup" mode,
the motor can be startup by the throttle directly. P4 setting range is 0 or 1, press
button (UP) or button (DOWN) for selection. P4 parameter setting method is the
same to that of P2.
After finishing P4 parameter setting, press button (SW) to save the current set
values, then press button (DOWN) to enter P5 parameter setting interface.
○ P5 Power Monitoring Setting
Enter P5 parameter setting interface after P4 parameter setting is finished, press
button, P5 parameter column flashes.
To Next Page
Loading...
