SZKTDZ KT-LCD8S - C7 Cruise Function Setting

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 32 -
C6 parameter setting interface
C6 is the meter backlight brightness adjustment setting, the default value is 3, and
setting range is 1-5, press button (UP) or button (DOWN) for selection.
C6 parameter definition table：
C6 value
Backlight brightness
1
Dimmest
2
Darker
3
Standard
4
Brighter
5
Brightest
After finishing C6 parameter setting, press button (SW) to save the current
value and then press button (DOWN) to enter C7 parameter setting interface.
○ C7 Cruise Function Setting
Enter C7 parameter setting interface after C6 parameter setting is finished, press