SZKTDZ KT-LCD8S - C9 Power-On Password Setting

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 34 -
C8 parameter setting interface
C8 is motor operating temperature display setting, the setting range is 0 or 1,
press button (UP) or button (DOWN) for selection.
C8 parameter definition table：
C8 value
Motor operating temperature
0
Function off
1
Function on
Please Note：The motor operating temperature display requires installing temperature
sensor in the motor, output temperature detection signal simultaneously.
After finishing C8 parameter setting, press button (SW) to save the current
value and then press button (DOWN) to enter C9 parameter setting interface.
○ C9 Startup Password Setting