SZKTDZ KT-LCD8S - Page 37

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 35 -
Enter C9 parameter setting interface after C8 parameter setting is finished, press
button (SW), C9 parameter column flashes.
C9 parameter setting interface
C9 is meter power-on password setting, the default value is 0, press button (UP)
or button (DOWN) for selection.
C9 parameter definition table：
C9 value
Startup password setting
0
Function off
1
Function on
When C9 setting is 1, indicating that the password function is startup, and then enter
the password settings interface, three password setting columns flash.