SZKTDZ KT-LCD8S - User Settings and Version Info

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
- 45 -
4. L4 parameter is used to adjust the delay time of automatic shutdown of the LCD, the
default value is 5, and the range of adjust is 5-120 minutes.
4.1. When L4=5, the delay time is 5 minutes.
4.2. When L4=6, the delay time is 6 minutes.
4.3. When L4=7, the delay time is 7 minutes.
………….
4.4. When L4=120, the delay time is 120 minutes.
○ Exit Parameter Setting
Under each parameter setting interface, if there’s no button operation on the meter for
more than 1 minute, and then the meter will automatically return to display 1, and the
original parameters will be saved.
Parameter Copy
Set parameters (include general project parameter, P parameter and C parameter) of
all KT-LCD8S meter produced by our company according to requirements, and set the
meter to be a data source according to the method of "C11 meter attribute selection
setting".
Use special wiring cables to properly wire to LCD8S meter needs to be copied