Tait TP9400 User Manual

114 Customizing radio settings
Changing to quiet operation
When quiet operation is on, keypress tones and
confirmation tones are turned off. Incoming call tones,
signalling tones and warning tones all remain audible.
To turn quiet operation on or off:
1 Select Menu > Radio settings >
Alert settings > Quiet operation.
(Depending on how your radio is programmed, you
may be able to press a function key to toggle monitor
on and off.)
2 Scroll to On (or Off) and press Select.
Changing to silent operation
When silent operation is on, all the radio’s audible tones
are turned off, and only channel traffic can be heard.
To turn silent operation on or off:
1 Select Menu > Radio settings >
Alert settings > Silent operation.
2 In the Silent Operation menu, scroll to either On or
Off and press Select.
While silent operation in on, the
icon appears in the
display.
SelectBack
Alert settings
Quiet operation
Silent operation
SelectBack
Alert settings
Silent operation
External alert

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000