Tait TP9400 User Manual

Operating in P25 trunking mode 73
Receiving an individual call
When you receive a call from an individual radio, your
radio displays the caller’s name or identity.
The radio rings until the call is answered.
Press the PTT key to accept the call, or Cancel to reject
the call.
Emergency calls
In an emergency, you can summon help by sending an
emergency call. When an emergency call is initiated, the
radio enters ‘emergency mode’. For more information on
emergency mode, see “Standard emergency mode” on
page 95.
Making an emergency call
You can make an emergency call using the emergency
function key (function key 1).
■ Press the function or emergency key to activate
emergency mode.
The message Emergency mode appears and the
radio sounds three short beeps, rising in pitch.
Receiving an emergency call
When you receive an emergency call, your radio displays
the caller’s name or identity and sounds a long beep.
Call received
Car 1
MenuCancel
Emergency mode
Menu
Emergency call
Car 1
Menu

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000