60 Operating in conventional mode
Activating standard scanning
Standard scanning is activated when you select a
standard scan group.
To select a standard scan group:
1 Press Menu and select Channels.
(Depending on how your radio is programmed,
you may be able to press a function key or use the
channel selector or Quick Access menu to select
channels.)
2 Scroll to the group you want and press Select.
Activating background scanning
Background scan is turned on using a programmed
function key. When the function key activates
background scan, the currently selected channel
automatically becomes a member of the background
scan group.
To turn background scan on:
■ Press the function key.
Background scan remains on until either you press
the function key again, or select a standard or
in-zone scan group.
Changing the background scan group
assigned to the function key
1 Press Menu and select Radio settings > Functions >
Set scan key.
2 Scroll through the list of background scan groups
available and press Select. When you next turn on
background scan, this is the scan group that is
activated.
Channels
Scan 1
Channel 9
SelectBack
To Next Page
Loading...
