Tait TP9400 User Manual

P25 services 87
Status request
This feature is only available for digital channels
operating in conventional mode, and for radios
configured for dispatcher operation.
You can find out what another radio user is currently
doing by asking them to send you a status update.
To send a status request:
1 Press Menu and select Services > Status request.
2 Select the status request recipient from the list.
3 Press Send to.
A message showing the destination appears in the
display.
The LED glows red and a message may be displayed
to advise you whether the message has been sent
successfully or not.
Status request
Car 2
Car 3
Send toCancel
Sending sts
rqst to
Car 2
Cancel

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000