Tait TP9400 User Manual

86 P25 services
Status update
You can inform other radio users of your current status
by sending them a status update, for example, ‘At scene’.
You may be able to send the status update to a
predetermined person or talkgroup, or to a person of
your choice.
When you send a status message, you are also setting
your status, which the dispatcher may be able to check
by ‘interrogating’ your radio. You can change your status
at any time by selecting another status message and
sending it. See “Status request” on page 87.
To send a status update:
1 Press Menu and select Services > Status update.
(Depending on how your radio is programmed, you
may be able to press a function key or use your Quick
Access menu to select status update.)
2 Select the status message you want from the
message list.
3 Press Send to or Select.
A message showing the destination appears in the
display.
The LED glows red and a message may be displayed
to advise you whether the status update has been
sent successfully or not.
Status update
On site
At lunch
SelectCancel
Sending
status to
current group
Cancel

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000