Tait TP9400 - Changing a Groups Transmit Channel; Changing a Groups First or Second Priority Channel

82 Editing a scan group
Changing a group’s transmit
channel
1 In the Edit Group menu, select Change tx and press
Select.
The current transmit channel is identified by the
icon beside the channel name.
2 Select the new transmit channel and press OK.
Changing a group’s first or second
priority channel
1 In the Edit Group menu, select Change P1 or Change
P2 and press Select.
2 Select the new priority or priority 2 channel and
press OK.
Change tx
C:Channel 1
C:Channel 2
OKBack
Change P1
C:Channel 1
C:Channel 2
OKBack