P25 services 91
Radio inhibit and uninhibit
This feature is only available for digital channels
operating in conventional mode, and for radios
configured for dispatcher operation.
If you want to make another radio on the system
inoperable, you can use the radio inhibit feature. This
feature is also known as ‘stun’.
To the user of the inhibited radio, it appears as though
the radio has turned off. The radio remains inoperable
even if it is turned off and then on again.
The radio cannot return to operation until it receives an
uninhibit request. This is also known as ‘revive’.
Sending a radio inhibit request
1 Press Menu and select Services > Radio inhibit.
2 Scroll to the radio you wish to make inoperable.
3 Press Send to.
The LED glows red and a message appears in the
display.
If the radio has been successfully immobilized, an
acknowledgement message is displayed.
Radio inhibit
Car 2
Car 3
Send toCancel
Sending
inhibit to
Car 2
Cancel
Ack received
OK
To Next Page
Loading...
Need help?
General
