56 Operating in conventional mode
Checking that the channel is clear
Monitor allows you to override some or all of the radio’s
mutes, allowing you to hear if there is any traffic
(including talkgroup and individual calls) on a channel.
For analog channels, this is so that you can check that
the channel is clear before you make a call.
Turning monitor on and off
1 Press Menu and select Radio settings > Functions >
Monitor.
(Depending on how your radio is programmed, you
may be able to press a function key to toggle monitor
on and off.)
2 Scroll to On (or Off) and press Select.
While monitor is active, appears in the display.
To Next Page
Loading...
