Tait TP9400 User Manual

52 Operating in conventional mode
Making a talkgroup call
To make a call to the currently selected talkgroup
■ Press the PTT key.
Changing a talkgroup
1 Press Menu and select Talkgroups.
(Depending on how your radio is programmed, you
may be able to use a Quick Access menu to go to the
Talkgroup menu.)
2 Scroll through the list of talkgroups to the one you
want and press Select.
3 Press the PTT key to make a call to the currently
selected talkgroup.
Making an emergency call
For information about making and ending emergency
calls together with a explanation of how your radio
behaves in emergency mode, see “About emergency
calls” on page 94 and “Standard emergency mode” on
page 95.
Talkgroups
Talkgroup01
Talkgroup02
SelectCancel

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000