Tait TP9400 User Manual

Charging and caring for batteries 121
Low battery warning
Notice Do not allow a radio battery to fully discharge
every time you use it, or you will shorten the service life
of the battery.
When the battery is low, your radio warns you in the
following ways:
■ The battery icon on the radio display looks empty.
■ The status LED on the radio slowly flashes red.
■ A high-pitched beep sounds.
You should recharge or replace the battery as soon as
possible. When the battery is completely empty, the
message Battery is flat appears on the display. The
radio emits a long, low-pitched beep and then stops
working. Turn off the radio immediately.

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000