Tait TP9400 - Messages; Sending a Message

84 P25 services
Messages
You may be able to send short messages to another
radio user. These messages are defined at programming
time and are also known as ‘pre-programmed messages’.
The person to whom you are sending the message must
have the same message programmed into their radio in
order to read and display your message.
Sending a message
You may be able to send your message to a
predetermined person or talkgroup, or to a person of
your choice.
Sending a message to a predetermined
person or talkgroup
1 Press Menu and select Services > Messages.
(Depending on how your radio is programmed, you
may be able to press a function key or use your Quick
Access menu to select messages.)
2 Select the message you want from the message list.
3 Press Select.
A message showing the destination appears in the
display.
The LED glows red and a message may be displayed
to advise you whether the message has been sent
successfully or not.
Messages
En route
At scene
SelectCancel
Sending
message to
current group
Cancel